ARC MX2

Trowel-Grade Coating for Fine Particle Severe Sliding Wear

100% solids, ceramic-reinforced, multi-component system, formulated for extreme sliding wear and abrasion caused by fine particles.

92% pure alumina ceramic reinforcement yields maximum hardness and abrasion resistance
Preferred for slurries or particle flow with particulates less than 3 mm (1/8"") in size
Easily apply by trowel
Applied up to 6 mm (1/4") without sag
Bright white
No primer required

Applications	Cyclones Valves Hopper bins Pulp dewatering screws Wear plates Slurry pumps Agitators Mixers Cleaner cones Pipe spools Pulverizers
Dry Temperature (Max)	205°C (400°F)
Wet Temperature (Max)	95°C (203°F)
Tensile Adhesion (ASTM D4541) - kg/cm2 - MPa (psi)	38.9 – 23.5 (3400)
Color	White
Available Container Sizes	Nominal, based on a 3 mm (120 mil) thickness 2.5 liter kit covers 0.83 m² (8.9 ft²) 16 liter kit covers 5.28 m² (56.8 ft&lt²) Note: All components are pre-measured and pre-weighed. Also included in every kit are mixing and application instructions. 2.5 liter kit includes tools.

Let's talk

For inquires about products, sales, or to request a quote, please contact our Sales Office.