1. ARC Industrial Coatings
    2. Resurfacing Coatings for Concrete

    ARC EG-1 FC

    Rapid-Setting Epoxy Grout to Repair/Patch Concrete Surfaces

    ARC EG-1 FC is a three part, 100% solids, rapid setting epoxy grout that can return damaged concrete surfaces to foot traffic in as little as 1 hour and can sustain tow motor traffic within 6 hours of application.


    Not available in EMEA.

     

    Product Features

    • Accepts topcoat four hours after application
    • No primer required
    • Excellent for pitching and grading compound
    • Resurfaces concrete damaged by a chemical attack or mechanical stress
    • Fills voids prior to topcoating
    • Bonds to damp concrete
    • Sets fast, allowing rapid overcoating
    • Applies easily by trowel

    Product Literature

    Technical Data

    Applications
    • Fill spalled areas
    • Build up low areas
    • Form curbs and pads
    • Patch machinery footprint damage
    • Create slopes to drains
    Compressive Strength (ASTM C579) - kg/cm2 - MPa (psi) 546 - 53.6 (7700)
    Tensile Adhesion (ASTM D4541) - kg/cm2 - MPa (psi) 84 - 8.3 (1200)
    Maximum Service Temperature (Dependent on service)
    200°F (93°C) with intermittent water exposure
    150°F (66°C) with continuous water exposure
    Color Gray, Red
    Available Container Sizes

    Nominal, based on a 12 mm (480 mil) thickness

    • Patch Kit covers 0.75 m2 (8.1 ft2) 

    Note: Components are pre-measured & pre-weighed. Each Patch Kit includes mixing and application instructions plus tools.​​
     

    Let's talk

    For inquires about products, sales, or to request a quote, please contact our Sales Office.

    Contact sales office