1. ARC Industrial Coatings
    2. Abrasion Resistant Composites for Metal

    ARC BX5

    Rapid-Curing, Trowel-Grade Coating for Fine-Particle Moderate Sliding Wear
    Rapid curing, 100% solids, ceramic-reinforced, multi-component system, formulated for moderate sliding-wear and abrasion caused by fine particles.

     

    Product Features

    • High adhesion
    • Greater than 60% ceramic reinforcement
    • Surface tolerant
    • Cure under adverse conditions with maximum adhesion
    • Quickly patch and repair worn equipment and structures
    • Easily apply by trowel
    • Colors: Red* and Gray
      *Red not availabe in EMEA

    Product Literature

    Technical Data

    Applications
    • Pneumatic conveyors
    • Chipper and chip bins
    • Turbo separators
    • Ni-hard slurry pumps
    • Fly ash separators
    • Cyclones and hoppers
    • Transport fans
    • Hydro pulpers
    • Wear plates
    • Pipe elbows
    • Pulverizers
    • Screw conveyor
    Dry Temperature (Max) 120°C (248°F)
    Wet Temperature (Max) 60°C (140°F)
    Tensile Adhesion (ASTM D4541) - kg/cm2 - MPa (psi) 224 – 22.1 (3200)
    Available Container Sizes

    Nominal, based on a 3 mm (120 mil) thickness

    • 0.75 liter kit covers 0.25 m2 (2.69 ft2)
    • 2.5 liter kit covers 0.83 m2 (8.93 ft2)

    Note: Components are pre-measured and pre-weighed. Each kit includes mixing and application instructions plus tools.
     

    Let's talk

    For inquires about products, sales, or to request a quote, please contact our Sales Office.

    Contact sales office