1. ARC Industrial Coatings
    2. Coatings for Corrosion, Erosion, and Chemical Attack for Metal

    ARC S2

    Ceramic-Reinforced, Sprayable, Erosion-Resistant Coating
    An advanced, liquid, ceramic-reinforced coating for the protection of all metal sur-faces subject to erosive, corrosive, and severe fluid flow conditions.

     

    Product Features

    • Sprayable viscosity for rapid installation
    • Spark testable for pinhole-free verification
    • Extends equipment life
    • Improves fluid flow efficiency
    • Two-coat system 
    • Applied via conventional airless spray systems, brush, or roller
    • Wet film thickness of 0.25 – 0.5 mm (10 – 20 mils) per coat

    Product Literature

    Technical Data

    Applications
    • Flue gas ducts 
    • Heat exchangers
    • Quench zones 
    • Flue gas particulate filters
    • Chemical reactors 
    • Chemical storage and process tanks
    Dry Temperature (Max) 80°C (175°F)
    Wet Temperature (Max) 52°C (125°F)
    Salt fog 20000 hours
    Tensile Adhesion (ASTM D4541) - kg/cm2 - MPa (psi) 463 – 45.5 (6590)
    Color Gray, Green
    Available Container Sizes

    Nominal, based on 375 μm (15 mil)

    • 1125 ml cartridge covers 3.00 m2 (32.29 ft2)
    • 1.5 liter kit covers 3.94 m2 (42.4 ft2)
    • 5 liter kit covers 13.33 m2 (143.52 ft2)
    • 16 liter kit covers 42.67 m2 (459.26 ft2)

    Note: Components are pre-measured and pre-weighed. Each kit includes mixing and application instructions. 1.5 liter and 5 liter kits include tools.
     

    Let's talk

    For inquires about products, sales, or to request a quote, please contact our Sales Office.

    Contact sales office