1. ARC Industrial Coatings
    2. Coatings for Corrosion, Erosion, and Chemical Attack for Metal

    ARC S3

    FDA Compliant, Thin Film, Corrosion Resistant Barrier Coating
    ARC S3 is suited for corrosive applications including those where direct food contact exposures is a requirement. 

     

    Product Features

    • Complies to 21 CFR 175.300 Condition B&C
    • Acidic solution ≤pH5
    • Aqueous (acid/non-acid)
    • Dairy and bakery products
    • Oils and fats, dry solids
    • Spark testable for pinhole-free verification
    • Ceramic reinforcement resists erosion
    • Permeation resistant
    • Two-coat system
    • Easily applied by spray, brush, or roller
    • Minimum thickness of 250 μm (10 mils) per coat

    Product Literature

    Technical Data

    Applications
    • Storage tanks
    • Structural steel
    • Rail cars
    • Process equipment
    • Hoppers
    • Chutes
    Dry Temperature (Max) 74°C (165°F)
    Wet Temperature (Max) 52°C (125°F)
    Tensile Adhesion (ASTM D4541) - kg/cm2 - MPa (psi) 309 – 30.3 (4400)
    Color White
    Available Container Sizes

    Nominal based on 375 μm (15 mil) DFT

    • 940ml cartridge covers 2.5M2 (27 ft2)
    • 5-liter kit covers 13.33M2 (143.5​​ ft2)
    • 16 liter kit cover​s 42.7M2 (459.3 ft2)​

    Note: Components are pre-measured and pre-weighed to correct mix ratio. Each kit contains Part A&B, mixing and application tools and application instructions.
     

    Let's talk

    For inquires about products, sales, or to request a quote, please contact our Sales Office.

    Contact sales office