1. ARC Industrial Coatings
    2. Resurfacing Coatings for Concrete

    ARC 988

    Trowel-Applied, Quartz-Reinforced Concrete Resurfacer
    A high performance, quartz-reinforced composite that is designed to resurface and restore concrete surfaces, to protect new concrete, and to repair concrete damaged by severe chemical and physical abuse. 

     

    Product Features

    • Low maintenance overlayment
    • Provides long-term protection 
    • Avoids costly structural rebuild 
    • Reduces safety hazard caused by damaged concrete
    • Easily applied to vertical surfaces/non-sagging
    • Trowelable overlayment
    • Applied at minimum thickness of 6 mm (1/4")
    • Can be applied to damp concrete
    • Non-shrinking, no solvents, 100% solids

    Product Literature

    Technical Data

    Applications
    • Chemical containments
    • Equipment bases
    • Secondary containment areas
    • Sumps, trenches, and neutralization tanks
    Dry Temperature (Max) 93°C (200°F)
    Wet Temperature (Max) 65°C (150°F)
    Compressive Strength (ASTM C579) - kg/cm2 - MPa (psi) 1000 – 97.9 (14200)
    Tensile Adhesion (ASTM D4541) - kg/cm2 - MPa (psi) Greater than 35.1 – 3.4 (500) concrete failure
    Color Gray, Red
    Available Container Sizes

    Nominal, based on a 6 mm (240 mils) thickness

    System Kit covers 4.1 m2 (44 ft2) and contains:​

    • 1 x ARC 797 primer pack
    • 1 x ARC 988 resin pack
    • 3 bags of QRV reinforcement

    Bulk Kit covers 16.7 m2 (180 ft2) and contains:

    • 1 x ARC 797 Bulk kit primer pack
    • 1 x ARC 988 resin
    • 1 x ARC 988 curing agent
    • 12 bags of QRV reinforcement​

    Note: Components are pre-measured and p​re-weighed. Each kit includes mixing and application instructions plus tool
     

    Let's talk

    For inquires about products, sales, or to request a quote, please contact our Sales Office.

    Contact sales office