ARC EG-1

Fast-Setting Grout Resurfacer to Repair/Patch Concrete Surfaces
​​​​​​​​​​​​​​Use ARC EG-1 to resurface damaged concrete surfaces quickly, including voids up to 12 inches. ARC EG-1 bonds to damp or dry concrete, is fast-setting, and can be rapidly coated within 4 hours with other ARC coatings for improved chemical or mechanical protection. 
 
​ARC EG-1 is a 100% solids, three-part grout that uses a low viscosity​, moisture-tolerant epoxy chemistry that is reinforced with a dried blend of graded and pigmented silica aggregates.

 

Product Features

  • Resurface damaged concrete surfaces quickly
  • Fills voids up to 10 inches
  • Bond to damp or dry concrete
  • Forms curbs, pads, and drainage slopes

Product Literature

Technical Data

Applications
  • Fill spalled areas
  • Build up low areas
  • Form curbs and pads
  • Patch machinery footprint damage
  • Create slopes to drains

Wet Immersion 200 °F ( )
Tensile Adhesion 3.4 MPa ( )
Color Gray, Red
Available Container Sizes

Nominal, based on a 12 mm (480 mil) thickness

  • Patch Kit covers 0.75 m2 (8.1 ft2)  Red, Gray 
  • Bulk Kit covers 2.25 m2 (24.2 ft2)  Gray

Note: Components are pre-measured & pre-weighed. Each Patch Kit includes mixing and application instructions plus tools.​​

 

Let's talk

For inquires about products, sales, or to request a quote, please contact our Sales Office.