ARC 797

Fast-Penetrating, Modified-Epoxy Primer/Sealer
ARC 797 is used as a primer for applications involving CS2 and CS4 as well as 791 and 988 which can also be used in a multi-coat application as a concrete sealer.

 

Product Features

  • Apply by roller, brush, or airless spray
  • Provides a proper surface for application of other ARC epoxy-based coatings for concrete
  • Bonds to damp concrete
  • Penetrates and seals concrete surface layer
  • Low mixed viscosity
  • 100% solids; low VOC's; no free isocyanates
  • Can be applied to damp concrete
  • Promotes strong adhesion to concrete

Product Literature

Technical Data

Applications
As a primer:
  • Primarily for ARC 791 and 988
  • Secondarily for CS2 and CS4
As a sealer:
  • Concrete tanks
  • Secondary containment
  • Water intakes and dams
  • Sumps, drains and pits
  • Process floor areas
  • Pump bases
  • Equipment bases
Dry Temperature Max 93 °F ( 200 °C )
Wet Temperature Max 150 °F ( 66 °C )
Tensile Adhesion 3.4 Mpa ( )
Color Amber
Available Container Sizes

Nominal, based on a 250 µm (10 mil) dft
On porous concrete surfaces a two-coat application may be required to provide sufficient film thickness on surface for adhesion of topcoats.

  • 16 liter kit covers 53.3 m2 (586.8 ft2).

Note: Components are pre-measured and pre-weighed. Each kit includes mixing and application instructions.

 

Let's talk

For inquires about products, sales, or to request a quote, please contact our Sales Office.